|
|
Stellarvue 50mm Finderscopes
|
|
|
|
|

|
F50M2: Stellarvue 50mm Optical Finderscope Matte Gray- $ 139.00 This is our most popular and highly rated optical finderscope. Full multi-coatings on all optical surfaces, including the correct image erecting prism, increase contrast. It comes with our standard 50 degree 23mm fully multicoated crosshair eyepiece. This eyepiece has a focusing crosshair reticle and may be used with an illuminator available separately below. Includes our high resolution 50mm optical system, helical 1.25" focuser with rubber grip and correct image erecting prism. The finderscope weighs only 19 ounces and works with our standard 50mm ring systems. You may use other 1.25" eyepieces with this finderscope converting it to a small telescope. It performs very nicely with Naglers! This finerscope comes in a neutral matte gray finish that goes well with any telescope regardless of color.
|
|
|

|
F50W2: Stellarvue 50mm Optical Finderscope - White - $139.00 Same as the F50M2 above but this one comes in a gloss white finish. Shown with illuminator available separately.
|
|
|

|
F50W3: Stellarvue 50mm Optical Finderscope - $ 119.00 This is the straight through version of the F50W2 finderscope. It features the same 1 1/4" helical focuser as the F50W2 mounted in line with the light cone, eliminating the correct image erecting prism. This gives you the sharpest image and straight through viewing. It comes with our standard 50 degree 23mm fully multicoated crosshair eyepiece. This eyepiece has a focusing crosshair reticle and may be used with an illuminator available below. This finderscope weighs only 17 1/2 ounces with eyepiece. It will work with our standard 50 mm ring systems. This finderscope can be used as an autoguider using the LAA lens below.
|
|
|
|
LAA: Autoguider Adapter Lens - $29 The F50W3 above may be used with the small Orion or Meade type autoguiders. In order to reach focus, this lens is required. Merely screw this lens into the filter thread in front of the autoguider and then insert the guider in the finderscope instead of he eyepiece.
|
|
50 and 60 mm Mounting Rings
|
|
|

|
R50A/R60A: Finderscope rings - with SV clamshell/focuser mounting base - $ 45.00
This ring set comes with a quick release dovetail shoe that mounts directly to the Stellarvue cnc clamshell using two screws. It also mounts to the Stellarvue dual speed focuser using a single screw. It does not mount to the 2” Feather Touch focuser since the Feather Touch does not have any mounting holes. Rings are
|
|
|

|
R50D/R60D: Finderscope rings on dovetail stalk - $ 49.00
|
|
|

|
R50E/R60E: Finderscope rings for mounting to hinged rings - $ 35.00
|
|
|

|
R50F/R60F: Finderscope rings for 3.0-3.5" focuser - $ 68.00
|
|
|

|
R50S/R60S: Finderscope rings for SCT's - $ 59.00
|
|
|

|
R50T/R60T: Finderscope rings for Televue Clamshell - $ 59.00
|
|
|

|
R50TAK/R60TAK: Finderscope rings and base for Takahashi - $ 59.00
|